德国泰科阀门（国际）有限公司—广州总代理

产品用途：　　

德国泰科高温电磁阀系列，适用于中性纯净气体，尤其是空气、水、等管路的控制系统

广泛应用于船舶重工、测试设备、加湿设备、液压设备等，工作温度在300℃以上的导热系统中。

产地：德国

产品品牌：德国泰科（TEK）

结构特点：阀芯为不锈钢活塞式；活塞环用特殊耐温、耐磨材料制作活塞余金属阀腔不产生直接摩擦，寿命是同类产品十倍，阀体安装方向无限制，动作响应迅速，特制线圈，并采用散热的结构方式，因此不易烧毁长时间停止动作重新启动，动作同样灵敏

主要技术参数：　　

产品规格：DN0.5~DN200　　

适用介质：油、蒸汽、腐蚀性流体等　　

流通流体温度：+300~+450℃　　

介质压力：0.2~30Mpa　　

阀体材质：不锈钢　　

防护性能：防水、防爆、防腐　　

控制方式：常闭、常开　　

电源电压：DC12~127V AC36~380V　　

连接方式：内螺纹、法兰，根据工况要求选择　　

密封材质性能：耐温、耐压、耐磨、防腐　　

附加功能：根据工况要求选择　　

泄漏量：零

工作原理：　

常闭：当线圈通电时，电磁铁芯吸合，卸压孔打开，主活塞由介质压力推动，打开主阀口，介质流通。　当线圈断电时，主阀口关闭，介质截止。　

常开：当线圈通电时，电磁铁芯吸合，卸压孔关闭，主活塞由介质压力推动，关闭主阀口，介质截止。当线圈断电时，主阀口打开，介质流通。

German TEK Valves (International) Co., Ltd. - Guangzhou distributor

Usage: high temperature solenoid valve series, for neutral pure gases, especially air, water, and other pipeline control systems; widely used in Shipbuilding, test equipment, humidification equipment, hydraulic equipment, the operating temperature above 300 ℃ thermal systems. Origin: Germany Brand: German TEK (TEK) Features: Spool of stainless steel piston; piston ring with a special temperature, wear material than metal piston valve chamber does not produce direct friction, life expectancy is ten times the valve similar products unlimited body mounting direction, the action fast response specially designed coils, and using heat is structured, it is not easy to burn for a long time stop action restart action as sensitive main technical parameters: Size: DN0.5 ~ DN200 applicable medium: oil, steam , corrosive fluids circulating fluid temperature: +300 ~ +450 ℃ media pressure: 0.2 ~ 30Mpa body material: stainless steel protective performance: waterproof, explosion, corrosion control: normally closed, normally open supply voltage: DC12 ~ 127V AC36 ~ 380V connection: internal thread, flange, according to the conditions required to select sealing material properties: temperature, pressure, abrasion, corrosion Additional features: According to the conditions required to select leakage: zero works: NC: When the coil is energized when the electromagnet core pull, pressure relief hole opened by the medium pressure to promote the main piston to open the main valve port, medium flow. When the coil is de-energized, the main valve port closed, medium cutoff. Normally open: when the coil is energized, the solenoid core pull, pressure relief hole is closed, the main piston driven by the medium pressure, close the main valve port, the media off. When the coil is de-energized, the main valve port open, medium flow.

进口超高温电磁阀